Electrosurgical Grounding Pads
Electrosurgical grounding pad(also called ESU plates) is made from
electrolyte hydro-gel and aluminum-foil and PE foam, etc.Commonly
known as patient plate, grounding pad or return electrode.It is
negative plate of the high frequency electrotome. It is applicable
to electric welding,etc. of the high frequency
electrotome.Conductive surface made of Aluminum sheet, low in
resistance, negative of cytoxicity skin, sensitization and acute
1.) Air permeable Foam and Nonwoven fabric backing materials make
the powerful adherence and comfortable.
2.)Making surgical operation more safety.
3.)We make the hydro-gel all by ourselves, and we can also provide
grounding pads with blue gel.
The conductive gel covers over the edge of metal foil, Its large
and wide surface area promotes low current density, which in turn
can be safely directed out of the patient's body during an
electro-surgical procedure to prevent burn. These pads offer extra
patient safety by signaling the system to shut down if the patient
is not in complete contact with the pad.
Foam and Non-woven fabric backing material, monopolar & bipolar
model and upright and horizontal shape etc.
Certificate & approval:
All materials pass ISO10993 biocompatible test, Non-cytotoxic,
without stimulus and sensitivity; Good adhesive and conductive
Match with electrosurgical generator, radio frequency generator and
other high frequency equipments.
Method of Application:
1.Following surgical procedure, remove electrode slowly to avoid
2.Choose a well site of the full muscle and sufficient blood (for
example big leg, buttocks and upper arm), avoid bony prominences,
joint, hair and scar.
3.Remove backing film of the electrode and apply it to the site
suitable for patients, secure cable clamp to the electrode tab,
make sure that two metallic film of the clamp contact with aluminum
foil of the tab and do not show aluminum foil.
4.Clean skin of the patient, shave excess hair if necessary